Internal Corner Tray
Need some help?
If you need to speak to someone about this product, our sales and technical support advisors are here to help.
Get in touch >BIM
We have partnered with the BIMstore to help provide you with the highest standard of BIM content around.
Browse BIM Information >Product Code GW296
265mm length x 155mm height
Horizontal
75-225mm
102.5mm
Internal
25 per box
3.7kg
Polypropylene
Vacuum Formed
Yes
Product Description & Key Features
The GW296 Internal Corner is used where a straight horizontal cavity tray system is required to change direction around an internal corner. Locating ribs ensure a positive overlap while the attached mastic tape creates a tight bonded seal. The GW296 Internal Corner tray can also be supplied with short, standard or long lead stapled and sealed to the tray in either code 4, code 5 (special order) lead or a lead replacement.
- Preformed tray holds itself rigid within the wall cavity
- Location ribs ensure correct overlap with adjacent trays
- Mastic tape creates a watertight joint between trays
- Removable foam strip leaves a slot for lead installation
- Code 4 and 5 pre-leaded trays are available to order
Literature and Technical Info
pdf (1.03 MB)
pdf (958.62 KB)
pdf (154.71 KB)
