Dry Fix Clay Unions

Need some help?

If you need to speak to someone about this product, our sales and technical support advisors are here to help.

Get in touch >

BIM

We have partnered with the BIMstore to help provide you with the highest standard of BIM content around.

Browse BIM Information >

Product Code GDRR-CU

Black
309 x 56mm
20-30mm
325mm
15° to 45°
12 per box
Polypropylene
Injection Moulded
Yes

Product Description & Key Features

The Clay Union sits in the gaps between each of the clay ridge or hip tiles, holding them in place. The union's body slides onto the end of the tile and is flexible so that it bends to the shape of the tile. The next tile slots into the other side of the union and this continues along the full length of the ridge or hip. Once the tiles are all correctly rested in place, the unions are secured by driving the screw assembly; complete with clamp plate and sealing washers, through the hole in the top and into the horizontal batten below. The screws should be tightened down so that the clamp plate presses down on the tile securing it in position. The unions are available seperately or as part of Manthorpe’s Clay Ridge or Hip systems which can be purchased with all the components required to cover a run of approximately 6 metres.

  • Unions can flex to suit both round and angled ridge/hip tiles
  • Designed to suit thicker clay tiles up to 30mm thick
  • The 4 inch screw provides a secure fixing into the ridge batten
  • The stainless steel clamp plate ensures the tiles are securely pinned in place
  • Neoprene washer forms a watertight seal around the screw hole
  • Foam spacer washer ensures tight fit onto the tile

Literature and Technical Info