Code: GW294
Cavity trays for moisture drainage
A cavity tray provides a barrier within a cavity wall, to prevent the ingress of moisture into the inside of the building, resulting in damp build up. By collecting moisture, which has penetrated the external wall and directing it safely out. Cavity trays, used in conjunction with appropriate weep vents, serve to prevent this major damage and its associated high repair costs.
Manthorpe supplies an extensive range of cavity trays to suit new build and refurbishment projects, covering all manner of scenarios, including internal and external corners, roof abutments, cavity bridges and lintels, as well as trays available for brickwork, blockwork and stonework details. Also available with lead flashing attached. These trays are designed to fit and work seamlessly with Manthorpe’s own range of weep vents, simplifying both sourcing and installation.
Our cavity trays are entirely British manufactured, as are the majority of our products; proudly supporting British manufacturing and minimising risk in the supply chain and in your project schedules.
Cavity trays – free take-off service
Ensuring that you have just the right quantity of cavity trays can be a tricky and time-consuming calculation, so we offer free-of-charge take-off service to help you order the correct types and quantities of cavity trays. All we need are the elevation drawings to be able to advise you on the quantities you require.
If you need more information or advice on our cavity trays or any other aspect of a specific project, you can get in touch with us through our contact page webform or by email or phone, and we’ll be happy to help.
To find details for your local Area Sales Manager visit our Contact Us page.
Alternatively, stockists for our cavity tray systems and the full Manthorpe product range can be found through our ‘Find a stockist’ facility. Just pop in your postcode for a list of your nearest stockists and accompanying maps and directions.
And finally, remember to sign up for our new emails containing all the latest product updates, promotions and offers straight into your inbox.
Cavity trays for moisture drainage: 22 Results
The GW294 Refurbishment Horizontal Tray is designed to provide protection where a new horizontal roof abutment meets an existing wall. It can also be used where the original system has been found to have degraded or even left out of the wall construction. Alternatively it can be used in new...
Code: GW296
The GW296 Internal Corner is used where a straight horizontal cavity tray system is required to change direction around an internal corner. Locating ribs ensure a positive overlap while the attached mastic tape creates a tight bonded seal. The GW296 Internal Corner tray can also be supplied...
Code: GW297
The GW297 External Corner is used where a straight horizontal cavity tray system is required to change direction around an external corner. Locating ribs ensure a positive overlap while the attached mastic tape creates a tight bonded seal. The GW297 External Corner tray can also be supplied...
Code: GW298
The GW298 right hand Stop End is designed for use with the horizontal cavity tray system and prevent water discharging into the cavity. Each stop end is supplied with mastic tape ensuring a tight bonded joint is achieved between the stop end and tray.
Code: GW299
The GW299 left hand Stop End is designed for use with the horizontal cavity tray system and prevent water discharging into the cavity. Each stop end is supplied with mastic tape ensuring a tight bonded joint is achieved between the stop end and tray.
Code: GW290
The GW290 Apex Tray is the last tray to be fitted and goes at the top of the abutment. It has no up stands at either end and allows the water to be evenly dispersed down either side of the abutment. The tray has a unique front mortar clip that can be removed at any time once the mortar has...
Code: GW291
The GW291 right hand Intermediate Tray has an up stand at one end only. This is so that the water can run out of the tray down the cavity tray system. The up stand on the tray prevents driving rain penetrating the outer wall and tracking across the masonry. The tray has a unique front mortar...
Code: GW292
The GW292 left hand Intermediate Tray has an up stand at one end only. This is so that the water can run out of the tray down the cavity tray system. The up stand on the tray prevents driving rain penetrating the outer wall and tracking across the masonry. The tray has a unique front mortar...
Code: GW293
The GW293 Catchment Tray is located at the lowest point of the abutment. Up stands at both ends of the tray ensure that the water which runs down from the trays above is collected and safely diverted out of the wall. A G950 Weep Vent must be used in conjunction with this tray to drain the...
Code: GW293CC
The GW293CC-RH Corner Catchment Tray is designed for situations where an abutment ends at a corner to shield the corner from water entry, also where restricted space prohibits the fitting of a standard catchment tray. The tray has up stands at both ends ensuring the water, which runs down...
Code: GW291-SBS
The GW291-SBS right hand Intermediate Tray suits larger course heights typically 150mm, 225mm in either stonework or blockwork and has an upstand at one end only. This is so the water can run out of the tray down the cavity tray system. The flexible perpend protector attached to the...
Code: GW292-SBS
The GW292-SBS left hand Intermediate Tray suits larger course heights typically 150mm, 225mm in either stonework or blockwork and has an upstand at one end only. This is so the water can run out of the tray down the cavity tray system. The flexible perpend protector attached to the...
Code: GW291-LBS
The GW291-LBS right hand Long Block Intermediate Tray suits low pitches in typically 150mm, 225mm coursing in either stonework or blockwork and has an upstand at one end only. This is so that the water can run out of the tray down the cavity tray system. The flexible perpend protector...
Code: GW292-LBS
The GW292-LBS left hand Long Block Intermediate Tray suits low pitches in typically 150mm, 225mm coursing in either stonework or blockwork and has an upstand at one end only. This is so that the water can run out of the tray down the cavity tray system. The flexible perpend protector attached...
Code: GW293-BS
The GW293-BS Catchment Tray is suitable for larger coursing heights typically 150mm, 225mm in either stonework or blockwork. This tray is located at the lowest point of the abutment. Upstands at both ends of the tray ensure that the water, which runs down from the trays above, is collected...
Code: GW293CC-BS
The GW293CC-BS Corner Catchment Tray is suitable for larger coursing heights typically 150mm, 225mm in either stonework or blockwork. It is designed for situations where an abutment ends at a corner to shield the corner from water entry, and where restricted space prohibits the fitting of a...
Code: GW281
The Manthorpe range of Lintel Trays are fabricated in three different sizes to suit cavity widths up to 150mm and lintel heights of 230mm, they are avaliable in rolled lengths of 5 and 25 meters. Its pre-creased design enables the tray to be folded to suit a variety of lintels profiles and...
Code: GW282
The Manthorpe range of Lintel Trays are fabricated in three different sizes to suit cavity widths up to 150mm and lintel heights of 230mm, they are avaliable in rolled lengths of 5 and 25 meters. Its pre-creased design enables the tray to be folded to suit a variety of lintels profiles and...
Code: GW283
The Manthorpe range of Lintel Trays are fabricated in three different sizes to suit cavity widths up to 150mm and lintel heights of 230mm, they are available in rolled lengths of 5 and 25 meters. Its pre-creased design enables the tray to be folded to suit a variety of lintels profiles and...
Code: G955
The G955 Lintel Stop Ends are designed to prevent water spilling off the ends of lintels into the cavity below causing damage and expensive repairs. In line with current recommendations the G955 Adjustable Lintel Stop Ends provide an economical and simple solution to this problem. Supplied in...
Code: G956
The G956 Adjustable Lintel Stop Ends are designed to prevent water spilling off the ends of lintels into the cavity below causing damage and expensive repairs. In line with current recommendations the G956 Adjustable Lintel Stop Ends provide an economical and simple solution to this problem....
Code: GW295
The GW295 Horizontal Tray is designed for straight horizontal abutments in new build situations. Integral stop ends and a hook feature removes the need for overlap of trays giving a total tray effective length of 900mm. The tray has unique front mortar clips that can be easily removed once...
Service
From our first foray into the building industry through to our latest product innovations, Manthorpe Building Products has grown year on year thanks to a philosophy of continuous investment and development.
Read moreQuality
At Manthorpe we pride ourselves on our high quality standards, not just for the products that we produce; but for our design, manufacture, sales and delivery processes as well.
Read moreInnovation
Innovation has always been at the core of the company. From new technology investment to in-house research and development, Manthorpe is constantly looking ahead to meet the needs of the industry.
Read more
